Modern Transportation and Metallurgical Materials

References

[1]管仁国，娄花芬，黄晖，等.铝合金材料发展现状、趋势及展望[J].中国工程科学，2020, 22(5):68-75.

[2]晁代义，孙有政，刘晓滕，等. Zn/Mg比及时效温度对Al-Zn-Mg-Cu系合金析出行为的影响[J].材料导报，2019,33(S2):398-401.

[3]洪永先.铝合金中各种合金化元素的作用[J].轻合金加工技术，1987(12):53.

[4]唐仁奎. Zn含量对7XXX铝合金性能及微观组织影响[J].锻压技术，2017, 42(4):184-187.

[5] Zou Yan,Wu Xiaodong,Tang Songbai,et al. Investigation on microstructure and mechanical properties of AlZn-Mg-Cu alloys with various Zn/Mg ratios[J]. Journal of Materials Science&Technology, 2021, 8(26):106-117

[6] Yuan D, Chen S, Chen K, et al. Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al-Zn-Mg-Cu alloys[J]. Transactions of Nonferrous Metals Society of China, 2021, 31(8):2220-2231.

[7] Xu Y, Zhang Z, Gao Z, et al. Effect of main elements(Zn、Mg and Cu)on the microstructure, castability and mechanical properties of 7XXX series aluminum alloys with Zr and Sc[J]. Materials Characterization, 2021,182:111559.

[8] Jia H, Piao Y, Zhu K, et al. Thermal stability and mechanical properties of Al-Zn and Al-Bi-Zn alloys deformed by ECAP[J]. Metals, 2021, 11(12):2043.

[9]娄琦. Zn/Mg比对Al-Zn-Mg-Cu合金组织与性能的影响[D].锦州：辽宁工业大学，2021.

[10]彭利洲，王锋华，董帅，等. Mg含量对Al-Zn-Mg-Cu合金组织和高温力学性能的影响[J].热加工工艺，2021, 50(22):54-59.

[11] Peng Y, Liu C, Wei L, et al. Quench sensitivity and microstructures of high-Zn-content Al-Zn-Mg-Cu alloys with different Cu contents and Sc addition[J]. Transactions of Nonferrous Metals Society of China, 2021, 31(1):24-35.

[12] KHALFALLAH A, RAHO A A, AMZERT S, et al.Al-5.46wt.%Zn-1.67wt.%Mg合金的GP区、亚稳η′相和平衡η相的析出动力学（英文）[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(2):233-241.

[13] Dong P, Chen S, Chen K. Effects of Cu content on microstructure and properties of super-high-strength Al-9.3Zn-2.4Mg-xCu-Zr alloy[J]. Journal of Alloys and Compounds, 2019, 788:329-337.

[14] Liao Y, Han X, Zeng M, et al. Influence of Cu on microstructure and tensile properties of 7XXX series aluminum alloy[J]. Materials&Design, 2015, 66:581-586.

[15]舒文祥. Mg和Cu元素调控的7XXX系铝合金凝固特性及强韧化机理研究[D].北京：北京科技大学，2016.

[16] Wang Z, Geng J, Xia P, et al. Phase transformation from η phase to S phase at grain boundary during annealing in rapidly-solidified Al-Zn-Mg-Cu alloy[J]. Materials Characterization, 2023, 195:112531.

[17]赵旭. Al-Zn-Mg-Cu合金时效硬化行为的EET理论研究[D].锦州：辽宁工业大学，2016.

[18]林方成，程鹏明，张鹏，等. Al-Zn-Mg系铝合金的微合金化研究进展[J].材料工程，2022, 50(8):34-44.

[19]王旭，吴私，刘运腾，等. Al-Zn-Mg-(Cu)系铝合金微合金化的研究进展[J].山东科学，2014, 27(1):56-62.

[20]林玉金，夏鹏，周楠，等. Zr与时效处理工艺对Al-ZnMg-Cu合金组织与性能的影响[J].铝加工，2022(6):45-50.

[21]田妮，张耀中，周轶然，等. Zr对Al-10Zn-2.5Mg-1.6Cu合金板材组织与性能的影响[J].东北大学学报（自然科学版），2022, 43(7):951-958.

[22]周民，甘培原，邓鸿华，等.含钪微合金化铝合金研究现状及发展趋势[J].中国材料进展，2018, 37(2):154-160.

[23] Sun Y, Luo Y, Pan Q, et al. Effect of Sc content on microstructure and properties of Al-Zn-Mg-Cu-Zr alloy[J]. Materials Today Communications, 2021, 26:101899.

[24]潘士伟，王自东，陈晓华，等.锆微合金化增强铝合金的研究进展[J].材料工程，2022, 50(8):17-33.

[25]刘莉.铝合金Sc、Zr微合金化效应与微观机理[D].哈尔滨：哈尔滨工业大学，2020.

[26]黄晖，文胜平，魏午，等.含铒铝合金研究进展[J].中国材料进展，2022, 41(10):778-785.

[27]王紫悦，陈子勇，聂祚仁.微量Er对Al-Zn-Mg-Cu合金组织与性能的影响[J].热加工工艺，2015, 44(2):118-120.

[28]方华婵，陈学海，陈康华.微量Er和Cr对超高强AlZn-Mg-Cu-Zr合金再结晶行为和性能的影响[J].粉末冶金材料科学与工程，2015, 20(5):690-699.

[29] Lin L H,Liu Z Y,Bai S,et al. Effects of Ge and Ag additions on quench sensitivity and mechanical properties of an Al-Zn-Mg-Cu alloy(Article)[J]. Materials Science and Engineering:A, 2017, 682:640-647

[30]王郁，王俊升，薛程鹏，等.微合金化对铝合金高温析出相影响的研究进展[J].航空制造技术，2021, 64(15):68-77.

[31]江鸿翔，赵九洲，李世欣，等.稀土微合金化处理对铝合金组织及性能的影响[J].中国稀土学会2022学术年会、第十四届中国包头·稀土产业论坛摘要集，2022:481.

[32] Guo Cheng, Zhang Haitao, Li, Shanshan, et al. Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag(wt.%)alloy processed by T6 or thermomechanical treatment[J]. Corrosion Science,2021, 188:109551

[33] Zuo J,Hou L,Shu X,et al. Grain refinement assisted by deformation enhanced precipitates through thermomechanical treatment of AA7055 al alloy[J]. Metals,2020, 10(5):594.

[34]袁珍贵，陈志国，李鸿娟，等.新型热机械处理调控Al-Zn-Mg-Cu合金微观组织与综合性能的机理[J].中国有色金属学报，2021, 31(2):280-288.

[35] Liu Tao, Jiang Haitao; Sun Hui; et al. Effects of rolling deformation on precipitation behavior and mechanical properties of Al-Zn-Mg-Cu alloy[J]. Materials Science and Engineering:A,2022, 847:143342

[36] Huo W T, Shi J T, Hou, L Get al. An improved thermo-mechanical treatment of high-strength Al-ZnMg-Cu alloy for effective grain refinement and ductility modification[J]. Journal of Materials Processing Technology,2017, 239:303-314

[37] Li Shiyong, Wang Qi, Chen Jianghua, et al. The effect of thermo-mechanical treatment on the formation of T1phase and δ′/θ′/δ′composite precipitate in an Al-CuLi-Mg alloy[J].Materials Characterization,2021, 176:111123

[38] WENG Yaoyao, JIA Zhihong, DING Lipeng, et al. Effect of pre-straining on structure and formation mechanism of precipitates in an Al-Mg-Si-Cu alloy[J]. Transactions of Nonferrous Metals Society of China, 2022,32(2):436-447.

[39] Wang Yin, Li Yong, Yu Weiet al. Effect of a special thermo-mechanical treatment process on microstructure and properties of 7185 alloy[J]. Journal of Alloys&Compounds,2023, 935:168072

[40] Zhang Y, Jin S, Trimby P, et al. Strengthening mechanisms in an ultrafine-grained Al Zn Mg Cu alloy processed by high pressure torsion at different temperatures[J]. Materials Science and Engineering:A, 2019,752:223-232.

[41] Langdon T G. Twenty-five years of ultrafine-grained materials:Achieving exceptional properties through grain refinement[J]. Acta Materialia, 2013, 61(19):7035-7059.

[42] Valiev R Z, Alexandrov I V. Nanostructured materials from severe plastic deformation[J]. Nanostructured Materials, 1999, 12(1-4):35-40.

[43] Valiev R Z, Langdon T G. Principles of equal-channel angular pressing as a processing tool for grain refinement[J]. Progress in Materials Science, 2006, 51(7):881-981.

[44]刘晓欢，李彦生，满意，等.高压扭转制备的Mg-SmCa合金组织演变及时效硬化行为[J].材料导报，2021, 35(6):6120-6125.

[45]滕广标，丁幸宇，陈勇，等.累积叠轧焊法制备铝基复合材料及其强化机制研究[J].热加工工艺，2019, 48(2):97-100.

[46] Machá?kováA. Decade of twist channel angular pressing:a review[J]. Materials, 2020, 13(7):1725.

[47]郝勇.等通道转角挤压制备高强铝合金的组织性能与织构演变[D].昆明：昆明理工大学，2011.

[48]杜飞.等通道双转角挤压Al-Zn-Mg-Cu合金变形行为及组织性能研究[D].合肥：合肥工业大学，2018.

[49] Iwahashi Y, Horita Z, Nemoto M, et al. The process of grain refinement in equal-channel angular pressing[J]. Acta Materialia, 1998, 46(9):3317-3331.

[50] Yilmaz T A, Totik Y, Lule Senoz G M, et al. Microstructure evolution and wear properties of ECAPtreated Al-Zn-Mg alloy:Effect of route, temperature and number of passes[J]. Materials Today Communications, 2022, 33:104628.

[51]毕见强，孙康宁，尹衍升，等.制备块体纳米材料的新工艺——等径角挤压[J].金属成形工艺，2003, 21(3):19-21.

[52] Elhefnawey M, Shuai G L, Li Z, et al. On achieving superior strength for Al-Mg-Zn alloy adopting cold ECAP[J]. Vacuum, 2020, 174:109191.

[53] Elhefnawey M, Shuai G L, Li Z, et al. On achieving ultra-high strength and improved wear resistance in AlZn-Mg alloy via ECAP[J]. Tribology International,2021, 163:107188.

[54] Manjunath G K, Udaya Bhat K, Preetham Kumar G V, et al. Microstructure and wear performance of ECAP processed cast Al-Zn-Mg Alloys[J]. Transactions of the Indian Institute of Metals, 2018, 71(8):1919-1931.

[55] Afifi M A, Wang Y C, Pereira P H R, et al. Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments[J]. Journal of Alloys and Compounds, 2018, 769:631-639.

[56] Fu J L, Jiang H J, Wang K K. Influence of processing parameters on microstructural evolution and tensile properties for 7075 Al alloy prepared by an ECAPBased SIMA process[J]. Acta Metallurgica Sinica,2018, 31(4):337-350.

[57] Bridgman P W. Effects of high shearing stress combined with high hydrostatic pressure[J]. Physical Review,1935, 48(10):825-847.

[58]薛克敏，张君，李萍，等.高压扭转法的研究现状及展望[J].合肥工业大学学报（自然科学版），2008,31(10):1613-1616.

[59]刘梅.基于HPT变形的Al-Zn-Mg-Cu合金晶粒细化及多元合金相演化研究[D].合肥：合肥工业大学，2019.

[60] Ghosh K S, Gao N, Starink M J. Characterisation of high pressure torsion processed 7150 Al-Zn-Mg-Cu alloy[J]. Materials Science and Engineering:A, 2012,552:164-171.

[61]薛克敏，刘梅，丁永根，等. Al-Zn-Mg-Cu合金高压扭转变形微观组织及力学性能[J].中国机械工程，2018, 29(13):1627-1631.

[62]李萍，吴广善，魏学峰，等.高压扭转对Al-Zn-Mg-CuZr合金抗应力腐蚀性能影响[J].稀有金属材料与工程，2019, 48(9):2981-2986.

[63]万雯，简发萍.高压扭转大塑性变形对Al-Zn-Mg-CuMn铝合金组织和织构的影响[J].热加工工艺，2018,47(11):144-146.

[64]薛克敏，王薄笑天，吴广善，等.高压扭转法制备非均匀层状结构Al-Zn-Mg-Cu-Zr合金的组织演变与力学性能（英文）[J].稀有金属材料与工程，2021,50(9):3125-3132.

[65]薛克敏，王薄笑天，严思梁，等.高压扭转-时效处理后新型Al-Zn-Mg-Cu合金的断裂行为[J].塑性工程学报，2021, 28(6):152-159.

[66] Xue K, Huang B, Yan S, et al. Effect of heterogeneous lamellar structure on mechanical properties and electrochemical corrosion behavior of Al-Zn-Mg-Cu alloy subjected to high-pressure torsion[J]. Journal of Materials Engineering and Performance, 2020, 29(7):4457-4462.

[67] Saito Y, Tsuji N, Utsunomiya H, et al. Ultra-fine grained bulk aluminum produced by accumulative rollbonding(ARB)process[J]. Scripta Materialia, 1998,39(9):1221-1227.

[68]王少华.累积叠轧焊法制备铝基复合材料组织性能研究[D].汉中：陕西理工大学，2020.

[69]吕爽，王快社，张兵，等.累积叠轧焊法制备超细晶纯铝的研究[J].热加工工艺，2007(22):48-51.

[70] Alvandi H, Farmanesh K. Microstructural and mechanical properties of nano/ultra-fine structured 7075 aluminum alloy by accumulative roll-bonding process[J]. Procedia Materials Science, 2015, 11:17-23.

[71]王耀奇，任学平，王宝伟，等. 7075铝合金累积叠轧焊组织与性能[J].稀有金属，2012, 36(5):830-834.

[72] Hidalgo-Manrique P, Cepeda-Jiménez C M, OrozcoCaballero A, et al. Evolution of the microstructure, texture and creep properties of the 7075 aluminium alloy during hot accumulative roll bonding[J]. Materials Science and Engineering:A, 2014, 606:434-442.

[73] Hidalgo-Manrique P, Orozco-Caballero A, CepedaJiménez C M, et al. Influence of the accumulative roll bonding process severity on the microstructure and superplastic behaviour of 7075 Al Alloy[J]. Journal of Materials Science&Technology, 2016, 32(8):774-782.

[74] Magalh?es D C C, Cintho O M, Sordi V L, et al. Improved tensile properties in heterostructured 1050/7050Al sheets produced by accumulative roll bonding[J].Journal of Materials Research and Technology, 2022,17:2014-2025.

[75] Ebrahimi S H S, Dehghani K, Aghazadeh J, et al. Investigation on microstructure and mechanical properties of Al/Al-Zn-Mg-Cu laminated composite fabricated by accumulative roll bonding(ARB)process[J]. Materials Science and Engineering:A, 2018, 718:311-320.

[76] Alizadeh M, Vahdatinejad F, Pashangeh S. Feasibility study of producing Al-5Zn-1 Mg alloy by accumulative roll bonding process and subsequent heat treatment[J].Engineering Failure Analysis, 2023, 143:106927.

[77]武晓雷，朱运田.异构金属材料及其塑性变形与应变硬化[J].金属学报，2022, 58(11):1349-1359.

[78] Zhang S, Yang M, Yuan F, et al. Extraordinary fracture toughness in nickel induced by heterogeneous grain structure[J]. Materials Science and Engineering:A,2022, 830:142313.

[79] Xiong T, Zheng S, Pang J, et al. High-strength and high-ductility AlCoCrFeNi2.1 eutectic high-entropy alloy achieved via precipitation strengthening in a heterogeneous structure[J]. Scripta Materialia, 2020, 186:336-340.

[80] Gao Tong, Li Chunxiao, Li Mengyu, et al. Influence of heterogeneous microstructure on the tensile properties of(Al2O3+AlB2)/Al composites[J]. Composites Communications,2022, 36:101401

[81] Ma E, Zhu T. Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals[J]. Materials Today, 2017, 20(6):323-331.

[82]李建生.层状异构金属材料制备及力学性能研究[D].南京：南京理工大学，2020[2023-01-14].

[83]袁亮亮，郭明星，鄢勇，等. Al-Zn-Mg-Cu合金异构组织内沉淀和溶质分布的理论设计和过程调控（英文）[J]. Transactions of Nonferrous Metals Society of China, 2021, 31(11):3328-3341.

[84] Chen Xiangyang, Guo Mingxing, Qiao Dexian, et al.Coordinated deformation and high formability mechanisms of Al-Zn-Mg-Si-Fe-Mn-Cu alloys with heterogeneous cellular structure[J]. Materials Science and Engineering:A,2022, 848:143407

[85] Yuan Liangliang, Guo Mingxing, Liu Zanyang, et al.Enhanced stiffness of Al-Zn-Mg-Cu alloys via heterogeneous structure of soft and hard microdomains[J]. Materials Science&Engineering:A, 2022, 841:143028

[86] Wang Congcong, Guo Mingxing, Yu Kangcai, et al.Evading the low formability dilemma in Al-Zn-Mg-Cu alloys via heterogeneous structure[J]. Materials Characterization,2022, 193:112295

[87] Yuan Liangliang, Guo Mingxing, Habraken Anne Marie,et al. Extremely improved formability of Al-Zn-MgCu alloys via micro-domain heterogeneous structure[J].Materials Science&Engineering:A,2022, 837:142737